THE DISPATCHER

The Dispatcher is a very flexible, wireless alarm panel that is used mostly as a wireless emergency call system. Wireless panic buttons are used to make installation and setup quick and easy. Each button, when pressed, causes a customized, user prerecorded message to be broadcast over the user's radio system for quick response and automatic dispatching. The system has extensive programmability for customized setup. The Dispatcher is compatible with virtually any radio system, including VHF, UHF, 800/900 Mhz, and trunking.

The Dispatcher can be used with other commercially available sensors (hardwired or wireless) to suit user needs.

• Wireless remote panic buttons provide voice notification to deputies or security personnel via existing radios for courthouse and courtroom emergencies and situations.

• User records specific message for each panic button.

• Panic buttons can be located anywhere without wiring. Use in the Judge's Chambers, District Attorney's Office, Clerk's Office, Courtrooms, Tax Collector/Assessor's Office, Courthouse Entrance, holding cells and other applicable areas.

• Panic buttons are fully supervised by the system to ensure working order. Sensor battery low and inactive sensors are automatically detected.

• Wireless sensor repeaters can easily be added to cover nearby annexes or other buildings.

• Motions sensors and door contacts for temporary security can be easily added (e.g. for evidence rooms, conference rooms, etc.)

• No hardwiring is necessary. Very cost effective for updating site security. Installations typically take only a few hours instead of days or weeks.

• Ideal for primary or backup emergency dispatch.

• No monitoring fees.

• Reduces requirement for staffing and overtime.

• Spread spectrum communication with built in redundancy ensures reliable communication from panic button to intelligent receiver.

• System can easily be relocated when moving facilities since there is no wiring.

SPECIFICATIONS AND FEATURES:

• Long Range Wireless Receiver Each long range receiver supports up to 64 supervised sensors and 13 wireless zones. Multiple systems allow an unlimited number of zones.

• Eight + 12V  DC outputs can be set to trigger external devices on alarm.

• Clock/Calendar - Schedule individual sensor ports based on time of day, day of week or holiday.

• Custom Message Capability: Voice messages can be recorded and assigned to individual zones. The maximum length of individual messages is 15 seconds. The system provides a total of 60 seconds for all messages. Voice recording allows recording of custom messages in any language.

• Automatic Self-Test Transmission: User may select and schedule status reports to check system operation.

• Power Requirements: System operates on AC power and a 7.5 ampere battery. Battery will provide backup power in the event of power failure. System requires connection to AC power and battery for operation.

• Remote Programming Via Radio Keypad and PC Software Program: System has remote programming capability over communication link. Use keypad to program system as alternate to using PC software program.

• Internal Memory of Alarms: System maintains an internal memory of the last 100 alarms by time, date and sensor.

• External LEDs indicate battery condition, AC power connection, system ON/OFF.

• Housing: Metal box enclosure designed for interior wall mounting. 

• Environment:
  Designed for indoor use unless otherwise specified.
  Temperature: Operable at -35C to +55C (30F to 130F)
  Humidity: 5% to 95% RM (non-condensing)
  

COMMUNICATION REQUIREMENTS

RADIO SYSTEM

The Dispatcher comes standard with a UHF or VHF business band radio. Other radio systems, including trunking, are compatible. All radio systems must be factory installed and tested. The Dispatcher is programmed and controlled by a keypad radio or PC software. Questions regarding your radio system’s compatibility, please contact the factory.

TELEPHONE SYSTEM

The cellular Dispatcher is equipped with a factory installed Motorola cellular phone and is controlled via any phone using the keypad or by PC Software. The standard phone version requieres connection to a PBX telephone system. Consult the factory for availability of cellular phones.