The aluminum Telescoping Extension Pole extends out to 16 ft (5 m) including the length of the Clamp Assembly. The Clamp Assembly, mounted to the far end of the Arm, securely holds the Buster, permitting placement against the exterior of high vehicles, ceilings, or other locations more than arms length from the inspector. The results can be read directly from Buster or using the Remote Display.

Lengths available are:

The Remote Display is connected to the K910B Buster by a flexible stretch cable which extends to 4 ft (1.21m) to permit use of the Buster in spaces which are inaccessible for direct viewing. 

The Remote Display can be carried attached to the extension arm or on a belt using its integral pocket clip and it uses the same common 9V battery as is used in the Buster.

This unit is used to detect false walls or bulkheads in the interior of vehicles when the exterior dimensions are known or can be measured. No need to unload the cargo - as long as the back wall can be seen, the unit will indicate it's distance correct to +/- 0.2 inches (+/- 3mm.). Measures in inches or metric.

SPECIFICATIONS

Diameter of Laser Spot
6mm. @ 10 m / 30 mm @ 50 m / 60 mm. @ 100 m

Beam Divergence
0.16 x 0.6 m rad

Impulse Duration
1 x 10-9S

Max Emitted Power
0.95 MW

Battery
4 x AA 1.5V

Dimensions
5.9 x 2.75 x 1.9 inches (150 x 70 x 50 mm)

Weight
17.6 ounces (500 grams)

Operating Temperature
32 - 122º F (10-50° C).

Splash Proof and Dust Proof