ELECTRONIC
SENTRY
PORTABLE SECURITY SYSTEM
The answer to site security
Battery Powered – Remotely Controllable – Voice Message Over Radio, Cellular Phone, or Standard PBX Phone Lines
The Electronic Sentry integrates the power of microprocessor based voice processing technology with true remote control capabilities. The combined technologies allow the Electronic Sentry to transmit prerecorded voice messages and/or customized alarm messages via radio, cellular phone or standard PBX phone lines when one or more sensors are broached. Messages can be literal or
selectively by recording tones/codes into the system. The system is controlled and programmed by radio keypad or by PC Software. This permits total management of all recordings, sensor adjustments, scheduling and numerous other features. Range of alarm transmission is limited only by the type of communication link used.
The Electronic Sentry uses Dual-Tech (PIR and Microwave) sensors. The unit provides greater than 40 ft. (12 m) of coverage for 360 degrees.
Operating temperature range is -32°F (-35°C) to 120°F (48°C). The system housing is constructed of fiberglass and rugged plastics rated for outdoor service. The Electronic Sentry weighs 50 lbs (22.6 kg). It is designed to provide years of indoor or outdoor service.
The Electronic Sentry runs about 200 hours on a single charge. A gel-cell lead acid battery provides long service life. When the battery needs charging, the Electronic Sentry will advise the user via radio with a verbal message. The internal battery is recharged by connecting the system to a small wall charger for 10 to 24 hours (110V or 220V). When the system is fully charged, charging automatically ceases to prevent damage to the battery.
-
Tilt/Acceleration switch detects tip over or assault of the Electronic Sentry
-
Clock calendar permits automatic enable/disable of individual Sentry systems or individual sensors in a Sentry based on time of day, day of week or due.
-
Vocabulary of 75+ words. Option for user input of up to 27 user recorded phrases (60 seconds maximum talk time).
-
Use default alarm
messages or make custom messages using any combination of the 75+
prerecorded words and user recorded phrases.
-
Automatic self-test transmission at user selected intervals provides confidence check of system operation without the need for external test equipment.
-
Automatic voice alarm on low battery.
-
Automatic Optimum
Charge Cycle Battery Charger for maximum charger operation.
-
Green LED indicate
battery charged. Red LED indicates charger operation.
-
Key switch prevents unauthorized shut-off. Alarm is generated if system is switched off.
-
User programming of
special features by use of DTMF keypad. Special user selectable
security codes prevent unauthorized access to programmable
features.
-
External alarm
input accepts contact closure from external source and transmits
unique alarm message.
-
Dry contact closure
(SPDT) provides alarm output to external equipment.
-
Preprogrammed 75+ word vocabulary and default alarm messages are stored in ROM and will remain indefinitely regardless of battery condition. A fully charged system may be left in storage for more than six months and still retain user recorded messages. The system may be left on float charge indefinitely.
-
Special sensor
adjustments and alarm analysis allow for system use in a variety
of environments.
